HPE 1.6TB PCI-Express 4.0 x4 NVMe Hot Swap High Performance Mixed Use Digitally Signed TLC (SE / FIPS) U.3 2.5-inch Solid State Drive (SSD) with Basic Carrier – P42593-001

HPE 1.6TB NVMe U.3 Mixed Use SSD — P42593-001

The HPE P42593-001 is a 1.6TB PCIe 4.0 x4 NVMe U.3 solid state drive engineered for mixed-use enterprise workloads. Featuring HPE”s Digitally Signed Firmware for enhanced security, FIPS 140-2 compliance, and a Basic Carrier for tool-free installation, this drive is purpose-built for HPE ProLiant and Apollo server platforms. Whether you”re running databases, virtualization, or analytics, the PM1735a-based PM1735a delivers the performance and security your data center demands.

Key Specifications

• Part Number / MPN: P42593-001
• Capacity: 1.6TB
• Form Factor: U.3 2.5-inch (SFF-8639)
• Interface: PCIe 4.0 x4, NVMe
• NAND Type: TLC (Triple-Level Cell)
• Drive Type: Mixed Use (MU)
• Carrier: Basic Carrier included

Performance

• Sequential Read: Up to 6,600 MB/s
• Sequential Write: Up to 3,100 MB/s
• Random Read (4K): Up to 1,000,000 IOPS
• Random Write (4K): Up to 200,000 IOPS
• Latency (Read): ~120 μs
• Latency (Write): ~20 μs

Endurance & Reliability

• Drive Writes Per Day (DWPD): 3 DWPD (Mixed Use)
• Total Bytes Written (TBW): ~8,760 TBW
• MTBF: 2,000,000 hours
• Power Loss Protection: Yes — capacitor-based
• Error Correction: LDPC ECC
• End-to-End Data Protection: Yes

Security

• Encryption: Self-Encrypting Drive (SED) — AES 256-bit
• FIPS 140-2 Validated: Yes
• HPE Digitally Signed Firmware: Yes — protects against unauthorized firmware modifications
• Sanitize Instant Erase (SIE): Supported
• TCG Opal 2.0: Compliant

Power

• Active Power (Read): ~25W
• Idle Power: ~8W
• Max Power: 25W

Physical & Environmental

• Form Factor: U.3 2.5-inch with Basic Carrier
• Operating Temperature: 0°C to 70°C
• Storage Temperature: -40°C to 85°C
• Shock: 1,000G / 1ms
• Vibration (Operating): 5.0 Grms, 10–800Hz

Compatibility

• Designed for HPE ProLiant Gen10 Plus and Gen11 servers with U.3 NVMe bays
• Compatible with HPE Apollo, Synergy, and select ProLiant DL/ML/BL platforms
• Requires HPE Smart Array or direct NVMe controller with U.3 support
• Basic Carrier included for tool-free hot-plug installation